Centrifugal Pumps area sub-class of dynamic axisymmetric work- absorbing turbo-machinery. Centrifugal pumps are used to transport fluids by the conversion of rotational kinetic energy to the hydrodynamic energy of the fluid flow. The rotational energy typically comes from an engine or electric motor. The fluid enters the pump impeller along or near to the rotating axis and is accelerated by the impeller, flowing radially outward into a diffuser or volute chamber (casing), from where it exits.



Our Dual Vessel Cartridge Unit (TDW) is the most commonly used filer cartridge unit in the Oilfield industry. This, offshore proof, skid-mounted filter unit can be supplied as a cartridge, bag or combination unit, equipped with all necessary valves and safety features. Our Dual Vessel Cartridge Unit offers the most cost-effective way to clean-up all possible oilfield fluids. It allows you to simultaneously filter with once vessel and easily change.

Mud Storage & Mixing Tank


Engine: Caterpillar C9 300 bhp Diesel Engine or Equivalent
Tanks: 2 x 70 BBL Mild Steel Tanks usable volume of 60-65
BBL per tank.
Coating: Derekane Coating for Anti Acid applications up to
32% HCL for Tanks
Agitators: One (1) Each Agitator in each Tank
C Pump: Two (2) C Pumps of Size – 4 x 5 x 11
Controls: Mounted in a Control Panel with Air Strut supported
with closing lid.
Valves: Acid Resistant PTFE Butterfly Valves



The trailer-mounted cement transporter is built according to ASME section VIII Division 1 and is capable of handling bulk material.

The banana-shaped cement transport trailer hauls 1,060 ft3 (30 cubic meters) volume in two equal compartments and is designed to perform at a maximum working pressure of 40 psi.

The interior is designed to allow dry material to flow out under airstream pressure to the surge tank or the field silo. Two manways are located on the top of the tank for performing maintenance operations and for top loading of sand.



The Frac Tank Trailer is a 500 BBL single-compartment unit suitable for use with HCL up to a concentration of 32%. Designed for use in all land-based operations, the Frac Tank Trailer (500 BBL Acid) features a manifold which allows the series connection of multiple units, providing the flexibility++++y to meet low and high fluid storage demands.

The tank incorporates a Tnemec lining specifically formulated for high acid resistance and longevity. Further, should the lining suffer any physical damage, repairs are relatively simple. Built as a self-contained trailer unit, the tank can be transported and placed on site easily without the requirement for any specialist lifting equipment.



  • Capacity: 15,000 bbl. to 80,000 bbl.
  • Capable to operate in Extreme Conditions.
  • Geo-Textile Membrane.
  • Valmex 7616 Waterproofing Membrane.
  • Operating Temperature: upto +70°C.
  • Warranty of 10 Years to Manufacturing Defects.


Capacity: 5000 USG Skid Mounted

Circulating line: 1 x 4” Fig 207 Union

Discharge Line: 1 x 4” Fig 207 Union

Lining: Derekane 470-300

Single Compartment, Double Valve (4”) at Discharge Line, Complete Handrails on top.